Tutti Ricambi
Tutti Ricambi 5-Port 2T Non-Injected 150cc Engine - Vintage
Description
Give your vintage scooter project a fresh starting point with this Tutti Ricambi 150cc five-port two-stroke engine. This non-injected version has no electric start and suits compatible four-speed large-frame scooters from 1959 onward, excluding the Vespa GS150. An exhaust and Ducati-style ignition module are included, while the wiring and rear-brake setup must be matched to your scooter.
Key Features
- 150cc two-stroke engine: Five-port configuration for a compatible large-frame restoration or engine replacement.
- Non-injected version: Supplied without electric start.
- Exhaust and ignition module included: Comes with an exhaust and Ducati-style ignition module for the engine installation.
- Four-speed application: For compatible large-frame scooters from 1959 onward, except GS150.
- Installation planning: Wiring, voltage regulation, and rear-brake parts depend on the original scooter and wheel size.
Technical Specifications
- Brand: Tutti Ricambi
- Part number: 145227NI
- Displacement: 150cc
- Engine type: Two-stroke (2T)
- Port configuration: Five-port
- Version: Non-injected
- Electric start: No
- Application: Four-speed large-frame scooters
- Lighting output: Single unregulated wire
- Idle jet: 40/130
- Air corrector: 160
- Atomizer / mixer: E3
- Main jet: 92
- Included: Engine, exhaust, and Ducati-style ignition module
Compatibility
Compatible four-speed large-frame scooters from 1959 onward, including the following applications. Does not fit Vespa GS150.
| Make | Models / frame families |
|---|---|
| Genuine | Stella 150 2T |
| Vespa vintage large frame | VNA, VNB, VBA, VBB, VLA GL150, VNL GT/GTR, VLB Sprint, VNC 125 Super, VBC 150 Super, VSB GS160, VSC SS180, VSD Rally 180, VSE Rally 200 |
| Vespa P/PX | VNX P/PX 125, VLX P/PX 150, VSX P/PX 200 E |
Installation Requirements
The Ducati-style ignition module is included. For compatible 10-inch-wheel large-frame scooters from 1959 onward without a battery or turn signals, plan for a voltage regulator, EIKH1 wiring harness, and 89471 switch. The switch may come with the harness kit. Mount the coil on the frame.
If retaining the original wiring harness on a scooter that did not originally use a CDI, you will also need the ENGHARN engine-to-CDI harness.
The engine-to-EIK wiring diagram is available for installation reference.
8-Inch Wheel Applications
An 8-inch rear wheel changes the overall gearing and increases engine RPM at a given road speed. Installation with 8-inch wheels is not recommended if regular use will exceed 45mph.
For an 8-inch-wheel installation, you will need two-pin brake shoes, a matching brake backplate, hub, and brake drum. These parts can be reused from an existing compatible two-pin 8-inch engine.
Product Diagrams
Features
Specifications
Part number: 145227NI; Brand: Tutti Ricambi; Displacement: 150cc; Type: two-stroke; Ports: five; Version: non-injected; Electric start: no; Application: four-speed large-frame scooters; Lighting output: single unregulated wire; Idle jet: 40/130; Air corrector: 160; Atomizer: E3; Main jet: 92; Included: engine, exhaust, and Ducati-style ignition module
Manuals / Install Instructions
Model Fitments
Compatible 4-speed large-frame scooters, 1959 onward, excluding Vespa GS150; Genuine Stella 150 2T; Vespa VNA, VNB, VBA, VBB, VLA GL150, VNL GT/GTR, VLB Sprint, VNC 125 Super, VBC 150 Super, VSB GS160, VSC SS180, VSD Rally 180, VSE Rally 200, VNX P/PX 125, VLX P/PX 150, VSX P/PX 200 E; electrical and wheel/brake adaptation required as applicable