This is the complete harness kit for doing a non-battery wiring conversion. Works perfectly with our EIK1 electronic ignition kit, LCB1 coil pair, or installing a 5 port motor in a vintage scooter.

Includes:

EIKH1 harness

89471 handlebar switch

Brake switch (73611 or 181637)

Regulator (RT507 or RT516)

There are 6 options:

LF NO REG = Largeframe scooter, if you don't need a regulator (because your engine already came with one)

SF NO REG = Smallframe scooter, if you don't need a regulator

LF 12 REG = Largeframe scooter, 12V regulator (best for using a 5-port engine in a vintage bike)

LF 6V REG = Largeframe scooter, 6V regulator (recommended for use with our EIK kit)

SF 12V Reg = Smallframe scooter, 12V regulator

SF 6V REG = Smallframe scooter, 6V regulator

If you're not sure which kit you need, call!