Lower Your Genuine Buddy!

Short Buddy Riders Unite!

We have confirmed that the Scooterworks Low Down rear shock fits on all Genuine Buddys, RoughHouse, Rattler and Black Cat!

Lower your Genuine Buddy by three inches with this seat and rear shock

Our adjustable Scooterworks Low Down shock will lower the Buddy seat height from ½” to 1½”, giving you a new seat height of 28½”.  When this is combined with the Buddy Low Profile seat, the seat height drops an additional 1½”, for an overall drop of three inches, bringing the total seat height down to 27”!

 Lower the seat height on your Genuine Scooter up to three inches.

Installation is a snap.  To fit the Scooterworks Low Down shock on these models, you’ll need just to flip the lower clevis (so the offset is facing outward and the bolt enters from the inside).

 Close up of Low Down Shock installation on a Buddy Scooter.

For heavier Buddy riders, or those who ride two-up, we advise that you adjust the preload higher and set the height of the shock to no lower than a 1” drop, unless you remove the rear fender for added clearance for the fuel valve.  We tested the shock at this setting on a Buddy with a 220lb rider and had no clearance issues.

The RoughHouse low profile seat is due in this spring.

Welcome to the Slaughterhouse

Scooterworks Tech advisor, Ken, took full advantage of an unsuspecting Roughhouse last week.  The result was a very angry scooter that he dubbed ‘The Slaughterhouse’.

With a suspension overhaul, the Prima race pipe and a slew of NCY performance parts, he took this scooter from a back roads errand runner to an asphalt hell raiser.

RoughHouse Scooter, this 50cc 2t means business

Ken replaced the stock cylinder with a 68cc ceramic NCY jug and head, and the NCY Direct Ignition Coil was added for hotter spark.  He swapped the stock carb with an adjustable 19mm Malossi carburetor to compensate for the bigger displacement.  The air box was replaced with the Scooterworks racing air filter for more flow, and the new carbon fiber Pinasco reeds make this baby’s heart a-flutter.  All of these changes mean that this little beast is breathing the way it was meant to, and getting all of the tasty premix it so craves.   He also installed the NCY Super Trans Kit, using lighter weights for more delicious torque, and a Malossi Kevlar Belt to handle it all.

The beefed-up front end on the Slaughterhouse is probably the most obvious upgrade.  Ken replaced just about everything he could with NCY parts, from fork tubes and the disc brake to the caliper and valve stems.  The result- a better ride that eats stoppies for breakfast.

Multiple angles on this scooter's performance upgrades

Ken also snagged our prototype low profile RoughHouse seat (expected this spring, in black and red) and installed the Scooterworks Low Down Shock, reducing the seat height a full three inches in the process.

All of these upgrades are well and good, but perhaps the most notable and reasonable for the sane rider, such as you, are the tires.  By switching from the stock knobby tires to Vee Rubber sport tires, he has added about 4 mph to his top speed, all while giving the Slaughterhouse a more refined, business casual look.

Sport tires and a race exhaust on a Genuine RoughHouse Scooter

 

Side by side of a stock Genuine RoughHouse and a customized, angrier one.

The Slaughterhouse is not affiliated with the Slaughterhouse Rally, which is held in Chicago every year over Labor Day weekend, and is awesome.  For more info on that, join their Facebook group or scope out their website.  This year’s details are coming soon!

 

Build List:

Prima Race Pipe, Genuine 50cc (PE-THIRTYTWO)

NCY Super Trans Kit; GY50/QMB139 (1200-1171)

NCY Rollers 16×13, 6G (1200-1051)

Direct Ignition Coil 0900-1075

NCY Cylinder w/ Head 47mm, 68cc (1100-1245)

NCY Adjustable Front Forks (1000-1134)

NCY 200mm Floated Disc Brake  (1000-1289)

NCY Forged Brake Caliper (1000-1311)

NCY Banjo Bolt (1600-0010)

NCY Throttle & Grip Set (0800-0102)

NCY Brake Line (1100-1238)

Prima Rear Rack (RRRAT1-B)

Scooterworks Low Down Shock (1000-1293)

Vee Rubber Sport Tire, Front (0600-0063)

Vee Rubber Sport Tire, Rear (0600-0033)

NCY Valve Stem (0600-0005)

NCY Axle (1000-1263)

Scooterworks Racing Air Filter (1300-1112)

Malossi Kevlar Belt (M 6112729)

Pinasco Reed Petals (P 10387503)

19mm Malossi Performance Carb M 1611028