Bando Kevlar 669x18.2x30 CVT Belt - 50cc Short Case Scooter

Upgrade your short-case 50cc CVT with the Bando 669x18.2x30 Kevlar drive belt. High-tensile Kevlar cords reduce belt stretch and prevent failure under high heat and load. EPDM compound resists heat and incidental oil contact. OEM supplier to Honda and Kymco. Made in Japan. The 669-18.2-30 size is the standard fitment for short-case 50cc 4-stroke scooters with a 10-inch rear wheel. Mechanic's note: A short-case engine is easily identified by a 10-inch rear wheel. If your original belt shows cracking or glazing, it's time for a replacement. Always inspect your variator rollers when installing a new belt.

• Dimensions: 669mm L x 18.2mm W x 30° groove angle
• Material: Kevlar-reinforced EPDM
• Weight: 0.3 lbs
• MPN: 669-18.2-30-8.5K
• Made in Japan by Bando

Compatible Models (short-case 50cc, 10" rear wheel):

• Honda: Aero 50 (1984–86), Elite SB50 (1990), Gyro (1984–86), Spree 50 (1984–86)
• Wolf / Bintelli: Islander, RX-50, Lucky, Jet, Breeze, Sprint 50
• Hyosung: Prima, Rally 50, SB50M, Sense, SF50B, Supercap (2005–2012)
• Schwinn: Hope 50, Laguna 50, Newport 50, Sport 50, Valo 50
• Twist N' Go: Venice, Venice LX, LS49, SS49, Milano 50 (2004–2007)
• Chinese GY6 / QMB139: TaoTao Pony, Baja SC50, Panterra Freedom/Fusion/Retro, SunL Elite, Roketa

Mechanic's note: A short-case engine is easily identified by a 10-inch rear wheel.  Always inspect your variator rollers when installing a new belt.

California Prop 65 Warning: www.p65warnings.ca.gov

• Kevlar-reinforced EPDM — reduces belt stretch and prevents failure under high heat and load
• 30° groove angle — matches GY6 variator and clutch pulleys for maximum grip
• Oil and heat resistant EPDM compound
• OEM supplier to Honda and Kymco — made in Japan
• Fit depends on matching the original 669 x 18.2 x 30 belt size; wheel size alone does not establish compatibility
• Notched inner profile shown in product photo
• Match original 669 x 18.2 x 30 belt marking before ordering

669mm length × 18.2mm width × 30° groove angle; Kevlar-reinforced EPDM; MPN 669-18.2-30-8.5K; made in Japan; SKU 106-96; listed weight 0.3 lb

Honda Aero 50 (1984–86), Elite SB50 (1990), Gyro (1984–86), Spree 50 (1984–86); Wolf/Bintelli Islander, RX-50, Lucky, Jet, Breeze, Sprint 50; Hyosung Prima, Rally 50, SB50M, Sense, SF50B, Supercap (2005–2012); Schwinn Hope, Laguna, Newport, Sport, Valo 50; Twist N' Go Venice, Venice LX, LS49, SS49, Milano 50 (2004–2007); Chinese GY6/QMB139 short-case TaoTao Pony, Baja SC50, Panterra Freedom/Fusion/Retro, SunL Elite, Roketa. Confirm original 669 × 18.2 × 30 belt marking.