Vespa Rear Brake Cable: ET2 / ET4 / LX150 / S 150

Smooth Control: Vespa Rear Brake Cable Assembly

Restore responsive stopping power to your scooter with this Complete Rear Brake Cable Assembly. Designed as a direct-fit replacement for the modern Vespa ET, LX, and S series, this cable features a low-friction inner liner and a reinforced outer housing to prevent stretching and ensure consistent lever feel during hard braking.

Technical Performance Features

• Pre-Stretched Steel Core: High-tensile inner wire is pre-stretched during manufacturing to minimize "cable creep" and the need for frequent adjustments.
• Low-Friction Sleeve: The inner housing is lined with a specialized polymer to reduce drag, providing a lighter lever pull and smoother modulation.
• Weather-Resistant Housing: Heavy-duty outer casing protects the core from moisture and road grime, preventing the internal corrosion that causes "sticky" brakes.
• OEM Fitment: Includes all necessary swaged ends and threaded adjusters for a "plug-and-play" installation—no cutting or crimping required.

Comprehensive Fitment Guide

This 77-inch cable is a direct replacement for 50cc to 150cc Vespa models with rear drum brakes:

Technical Specifications

• Total Length: 77 inches (1955mm)
• Outer Diameter: 0.3 inches (7.6mm)
• Inner Wire Diameter: 0.1 inches (2.5mm)
• End Screw Fitting: 0.35 inches (9mm)
• Hardware: Includes threaded adjuster nut and pivot barrel

Mechanic's Note: When routing your new cable, avoid sharp bends in the frame to prevent premature wear. For the smoothest operation, we recommend applying a light coat of cable lubricant to the inner wire before final installation.

Part Number: 564217
Vendor: Scooterworks USA

Length: 77 in
Outer Diameter: 0.3 in
Inner Diameter: 0.1 in
End Screw: 0.35 in

Vespa ET2 50, Vespa ET4 150, Vespa LX 50, Vespa LX 125, Vespa LX 150, Vespa S 50, Vespa S 125, Vespa S 150.