NCY
NCY 265mm Performance Rear Shock - Adjust Length & Preload
Description
This NCY adjustable rear shock helps your Honda Ruckus feel more composed over pavement ripples and through corners while giving you control over rear ride height and spring preload. Its progressive-rate spring responds smoothly to smaller bumps and firms up deeper in its travel, while the satin black body and gloss black spring give your build a clean, coordinated finish.
Key Features
- Adjustable length: A 10mm adjustment range lets you fine-tune the shock length and rear ride height.
- Adjustable preload: Set spring preload to tune suspension sag for your rider setup.
- Progressive-rate spring: Combines small-bump comfort with firmer support under deeper compression.
- Controlled damping: Heavy-duty internal oil-damping valving is optimized for lightweight scooter weight distribution, with a rigid twin-tube steel body that limits aeration for consistent damping.
- Black-on-black finish: A corrosion-resistant satin black powder-coated body pairs with a gloss black spring.
- Rider support: Supports riders up to 300 lb and is made in Taiwan by NCY.
Technical Specifications
- Brand: NCY
- Part number: 1000-1286
- Manufacturer part number: 640E2ZOOM2
- Placement: Rear
- Nominal mounting-center length: 265mm
- Length adjustment: 10mm range
- Photo-diagram length: 10? inches between mounting centers, approximately 270mm; confirm the adjusted length required for your setup
- Spring outer diameter: 2½ inches
- Upper mount: Eyelet with 10mm inside diameter
- Lower mount: Clevis with 8mm thread
- Spring: Progressive rate with adjustable preload
- Damping: Internal oil damping
- Body construction: Twin-tube steel
- Rider weight support: Up to 300 lb
- Finish: Satin black body and gloss black spring
- Country of origin: Taiwan
Compatibility
| Make | Model | Years | Fitment notes |
|---|---|---|---|
| Honda | Ruckus 50 (NPS50) | 2003 onward | Factory-height replacement application; check adjusted mounting-center length and airbox clearance |
| Honda | Zoomer 50, international models | — | Direct-fit application; check clearance |
| Vespa / Piaggio | ET2 50, ET4 50/150, LX 50, LX 150, select variants | — | Verify original mounting-center length, mount dimensions, and clearance |
| Yamaha | Zuma 50, Minarelli horizontal | Before 2001 | Ride-height adjustment application; compare original length, mounts, and clearance |
| Various Chinese makes | GY6 50cc / QMB139 single-shock builds | — | Verify shock length, mount dimensions, and clearance |
Ruckus airbox clearance: With the stock plastic airbox, the wider spring may require a small spacing washer or minor trimming of the non-structural plastic tab. Check clearance throughout suspension travel before riding.
Adjust length and preload to suit the installation without exceeding the vehicle manufacturer's load limits. The shock's rider-weight support does not increase your scooter's rated carrying capacity.
This product is intended for off-road use only. This product is not intended for use on public roads or land.
Product Diagrams
Features
Specifications
Brand: NCY; Part number: 1000-1286; MPN: 640E2ZOOM2; Placement: Rear; Nominal mounting-center length: 265mm; Length adjustment range: 10mm; Photo diagram: 10⅝ inches mounting-center length (approximately 270mm), confirm adjusted length; Spring OD: 2½ inches; Upper eyelet ID: 10mm; Lower mount: 8mm threaded clevis; Spring: Progressive rate; Preload: Adjustable; Damping: Internal oil; Body: Twin-tube steel; Rider support: Up to 300 lb; Finish: Satin black body/gloss black spring; Origin: Taiwan
Model Fitments
Honda Ruckus NPS50 2003 onward; Honda Zoomer 50 international; Vespa/Piaggio ET2 50, ET4 50/150, LX 50, LX 150 select variants (verify length and mounts); Yamaha Zuma 50 Minarelli horizontal before 2001; GY6 50cc/QMB139 single-shock builds (verify length and mounts); Check airbox and suspension-travel clearance
-
Same day shipping for orders placed before 2PM (CST) M-F
-
30-day return period on eligible items
-
Flat-rate shipping for orders shipped to the 48 Contiguous United States.
