NGK
Description
This NGK long-reach spark plug brings proven standard-plug construction to your vintage Vespa or Stella 2T tune-up, helping keep your scooter ready for the next ride. A copper core aids heat removal, while corrosion-resistant plating and triple seals support long service life and dependable performance.
NGK has discontinued B6ES and replaced it with BR6ES. BR6ES is the resistor version, with a 5k-ohm resistor.
Key Features
- Corrosion resistance: Trivalent metal plating provides anti-corrosion and anti-seizing properties.
- Flashover protection: Corrugated ribs help prevent flashover along the insulator.
- Strong ceramic insulator: Pure alumina silicate supports strength and heat transfer.
- Heat management: Copper core aids heat removal.
- Sealing: Triple seals help prevent leakage.
Technical Specifications
| Specification | Value |
|---|---|
| Store part number | SP2 |
| Current NGK plug | BR6ES |
| Superseded NGK plug | B6ES, discontinued |
| Thread diameter / pitch | 14mm / 1.25mm |
| Seat type | Gasket |
| Thread reach | 19mm (3/4 inch) |
| Hex size | 21mm (13/16 inch) |
| Terminal | Removable nut |
| Overall height standard | ISO |
| Gap reference | 0.9mm (0.035 inch) |
| Center electrode | Standard nickel, 2.5mm, non-projected |
| Ground electrode | Standard nickel, one electrode |
| Resistor | Yes, 5k ohm |
| NGK heat range | 6 |
| Torque reference, cast iron | 18–25.3 lb-ft |
| Torque reference, aluminum | 18–21.6 lb-ft |
Compatibility
- Vespa VSX P/PX 200 E
- Vespa VSE Rally 200
- Vespa VSD Rally 180
- Vespa VSB GS 160
- Vespa VSC SS 180
- Genuine Stella 2T
Installation Notes
Confirm the required plug specification, thread reach, heat range and resistor compatibility for your engine and ignition setup. Check and set the gap to the vehicle service specification before installation; the 0.9mm figure is a plug reference, not a universal setting for every application. Follow engine-specific installation and torque instructions rather than treating the reference ranges as universal.
Product Diagrams
Features
Specifications
Store part number: SP2; Current plug: NGK BR6ES; Superseded plug: NGK B6ES (discontinued); Thread: M14 x 1.25; Seat: Gasket; Reach: 19mm (3/4 inch); Hex: 21mm (13/16 inch); Terminal: Removable nut; Overall height standard: ISO; Gap: 0.9mm (0.035 inch), verify vehicle setting; Center electrode: Standard nickel, 2.5mm, non-projected; Ground electrode: Standard nickel, quantity 1; Resistor: 5k ohm; Heat range: 6; Torque references: Cast iron 18–25.3 lb-ft, aluminum 18–21.6 lb-ft, follow engine-specific service instructions
Model Fitments
Vespa VSX P/PX 200 E; VSE Rally 200; VSD Rally 180; VSB GS 160; VSC SS 180; Genuine Stella 2T; Match required plug specification, 19mm reach, heat range and ignition-system compatibility