Vee Rubber
Vee Rubber 2.75/3.00-14 Inner Tube - Angled Valve
Description
This Vee Rubber 2.75/3.00-14 Inner Tube gets your 14" pit bike, dirt bike or scooter rolling again after a flat. Its angled Schrader valve stem sits off to the side instead of pointing straight out, so it's easier to reach with a pump or gauge in tight wheels where a straight stem runs into the brake drum, hub or spokes. A threaded rim nut locks the valve to the rim so it stays put.
Key Features
- Wide size range: Fits 2.75-14 and 3.00-14 tires, plus the metric equivalents 80/90-14 and 80/100-14.
- Angled Schrader valve: Easier pump access in tight hubs, and it works with standard car-tire pumps and gauges.
- Rim nut included: Threaded valve stem with rim nut holds the valve square in the rim hole.
- Butyl rubber: Holds air well for everyday and trail riding.
- Vee Rubber quality: Molded with the Vee Rubber name, size and "Made in Thailand."
Technical Specifications
- Part number: 136-80
- MPN: MU0117
- Size: 2.75/3.00-14
- Metric equivalents: 80/90-14, 80/100-14
- Valve: Angled Schrader (AV), threaded with rim nut
- Material: Butyl rubber
- Country of origin: Thailand
- Brand: Vee Rubber
Compatibility
| Tire Size | Common Uses |
|---|---|
| 2.75-14 / 80/90-14 | 14" spoked-wheel scooters, mopeds, and small motorcycles with tube-type tires |
| 3.00-14 / 80/100-14 | Rear wheel on youth dirt bikes such as the Honda CRF80F and XR80R, plus 14" pit bike wheels using this size |
Always go by the size printed on your tire sidewall, not the model. Many youth trail bikes and pit bikes use a narrower 2.50-14 or 60/100-14 front tire and a 12" rear, and most 14" scooters with cast wheels run tubeless tires, so this tube isn't the right fit for those.
Installation Notes
- Inspect the inside of the tire and rim for thorns, sharp edges or a damaged rim strip before fitting the new tube. On spoked wheels, make sure the rim strip covers every spoke nipple.
- Add a little air so the tube holds its shape, feed the valve through the rim hole and thread the rim nut on loosely until the tire is seated.
- Inflate to the pressure shown on your tire sidewall or in your owner's manual, then snug the rim nut down.
- Riding hard off-road? Some riders prefer a straight TR4-style valve stem for dirt bike use. This angled valve is best where pump access is tight.
Product Diagrams
Features
Specifications
Part Number: 136-80 | MPN: MU0117 | Size: 2.75/3.00-14 | Metric: 80/90-14, 80/100-14 | Valve: Angled Schrader (AV) with rim nut | Material: Butyl rubber | Made in Thailand | Brand: Vee Rubber
Model Fitments
14" tube-type tires sized 2.75-14, 3.00-14, 80/90-14 or 80/100-14 | Honda CRF80F and XR80R rear | 14" spoked scooters, mopeds, pit bikes and small motorcycles | Not for 2.50-14 / 60/100-14 fronts or tubeless cast wheels | Verify tire sidewall size
-
Same day shipping for orders placed before 2PM (CST) M-F
-
30-day return period on eligible items
-
Flat-rate shipping for orders shipped to the 48 Contiguous United States.
