Tutti Ricambi

Tutti Ricambi 5-Port 2T Non-Injected 150cc Engine - Vintage

SKU 145227NI
$1,999.00
Shipping calculated at checkout.
Description

Give your vintage scooter project a fresh starting point with this Tutti Ricambi 150cc five-port two-stroke engine. This non-injected version has no electric start and suits compatible four-speed large-frame scooters from 1959 onward, excluding the Vespa GS150. An exhaust and Ducati-style ignition module are included, while the wiring and rear-brake setup must be matched to your scooter.

Key Features

  • 150cc two-stroke engine: Five-port configuration for a compatible large-frame restoration or engine replacement.
  • Non-injected version: Supplied without electric start.
  • Exhaust and ignition module included: Comes with an exhaust and Ducati-style ignition module for the engine installation.
  • Four-speed application: For compatible large-frame scooters from 1959 onward, except GS150.
  • Installation planning: Wiring, voltage regulation, and rear-brake parts depend on the original scooter and wheel size.

Technical Specifications

  • Brand: Tutti Ricambi
  • Part number: 145227NI
  • Displacement: 150cc
  • Engine type: Two-stroke (2T)
  • Port configuration: Five-port
  • Version: Non-injected
  • Electric start: No
  • Application: Four-speed large-frame scooters
  • Lighting output: Single unregulated wire
  • Idle jet: 40/130
  • Air corrector: 160
  • Atomizer / mixer: E3
  • Main jet: 92
  • Included: Engine, exhaust, and Ducati-style ignition module

Compatibility

Compatible four-speed large-frame scooters from 1959 onward, including the following applications. Does not fit Vespa GS150.

Make Models / frame families
Genuine Stella 150 2T
Vespa vintage large frame VNA, VNB, VBA, VBB, VLA GL150, VNL GT/GTR, VLB Sprint, VNC 125 Super, VBC 150 Super, VSB GS160, VSC SS180, VSD Rally 180, VSE Rally 200
Vespa P/PX VNX P/PX 125, VLX P/PX 150, VSX P/PX 200 E

 

Installation Requirements

The Ducati-style ignition module is included. For compatible 10-inch-wheel large-frame scooters from 1959 onward without a battery or turn signals, plan for a voltage regulator, EIKH1 wiring harness, and 89471 switch. The switch may come with the harness kit. Mount the coil on the frame.

If retaining the original wiring harness on a scooter that did not originally use a CDI, you will also need the ENGHARN engine-to-CDI harness.

The engine-to-EIK wiring diagram is available for installation reference.

8-Inch Wheel Applications

An 8-inch rear wheel changes the overall gearing and increases engine RPM at a given road speed. Installation with 8-inch wheels is not recommended if regular use will exceed 45mph.

For an 8-inch-wheel installation, you will need two-pin brake shoes, a matching brake backplate, hub, and brake drum. These parts can be reused from an existing compatible two-pin 8-inch engine.

Product Diagrams
Features
  • Tutti Ricambi 150cc five-port two-stroke engine
  • Non-injected version without electric start
  • Exhaust and Ducati-style ignition module included
  • For compatible four-speed large-frame scooters from 1959 onward, excluding Vespa GS150
  • Single unregulated lighting wire; application-specific electrical installation required
Specifications

Part number: 145227NI; Brand: Tutti Ricambi; Displacement: 150cc; Type: two-stroke; Ports: five; Version: non-injected; Electric start: no; Application: four-speed large-frame scooters; Lighting output: single unregulated wire; Idle jet: 40/130; Air corrector: 160; Atomizer: E3; Main jet: 92; Included: engine, exhaust, and Ducati-style ignition module

Manuals / Install Instructions
Model Fitments

Compatible 4-speed large-frame scooters, 1959 onward, excluding Vespa GS150; Genuine Stella 150 2T; Vespa VNA, VNB, VBA, VBB, VLA GL150, VNL GT/GTR, VLB Sprint, VNC 125 Super, VBC 150 Super, VSB GS160, VSC SS180, VSD Rally 180, VSE Rally 200, VNX P/PX 125, VLX P/PX 150, VSX P/PX 200 E; electrical and wheel/brake adaptation required as applicable

  • Same day shipping for orders placed before 2PM (CST) M-F
  • 30-day return period on eligible items
  • Flat-rate shipping for orders shipped to the 48 Contiguous United States.
Since 1989

Supplying parts and accessories for vintage and modern scooters since 1989 – Over Half a Million Served and Counting!

Comprehensive Resource

From wear-and-tear items like tires and oil filters to aftermarket parts from industry-leading brands.

Dealer Focused

With a committed team of dealer-focused sales reps and streamlined pricing and shipping processes, we are dedicated to supporting your business.

Innovative

Our team constantly strives to develop and source the best new products for your scooter.